Welcome to INBROLLY! We are open! That's why we use open systems and open solutions. We offer customization of our products according to your needs. Contact us also for wholesale pricing or custom module or firmware development.

CPU module PI-CPUF407
Module in format of Rasberry PI with STM32F407, Ethernet, Wi-Fi, 2x USB and MicroSD card
The PI family expands with CAN FD and RS-232/485/422 modules
There are two new modules for Raspberry Pi or PI-CPUF407. One is the PI-CAN module with CAN FD interface with speeds up to 8 Mbit/s and the other is the PI-RSX combination module with optional RS-232, RS-485 or RS-422 interfaces. These are stackable HAT+ modules with integrated EEPROM for module detection and both with LED activity indication.
INBROLLY launches a range of DIN-IPC controllers for industrial and IoT applications
Mountable to low profile distribution boards with the same profile as conventional circuit breakers
IPC-CPUF407 Automation Controller
IPC-CPUF407 is a DIN-IPC series controller for industrial and IoT applications. Its advantage is that it can be mounted in low profile distribution boards with the same profile as conventional circuit breakers. It includes the STM32F407 microcontroller, which supports Ethernet network interface, SDIO is used for Wi-Fi connectivity, as well as a wide range of other interfaces. It is therefore suitable for devices requiring either wired or wireless internet connectivity for data acquisition and control.
The world's first power bank rechargeable from a bicycle dynamo
Electric bicycles costing tens of thousands are in vogue. They carry a large battery that first needs to be recharged from a socket and then you can set off on a route of just a few dozen kilometres. Then you have to find a socket again and recharge it with electricity produced from non-organic sources. INBROLLY goes the other way. For enthusiasts who set out on their own for long periods in the countryside, on expedition trips, on bikepacking, with little or no contact from civilization. You certainly won't get an e-bike here, but navigation and a cell phone are now an important part of the kit. The last contact with civilization. And there is nowhere to charge these devices. And it is for this purpose that we present the world's first powerbank that can be recharged from a bicycle dynamo - DYNABANK.

News

The PI family expands with CAN FD and RS-232/485/422 modules

There are two new modules for Raspberry Pi or PI-CPUF407. One is the PI-CAN module with CAN FD interface with speeds up to 8 Mbit/s and the other is the PI-RSX combination module with optional RS-232, RS-485 or RS-422 interfaces. These are stackable HAT+ modules with integrated EEPROM for module detection and both with LED activity indication.

Read more: The PI family expands with CAN FD and RS-232/485/422 modules

Using PI-AIO and PI-DIO with Python in Raspberry OS

The PI-AIO and PI-DIO modules are connected to the Raspberry Pi on the I2C bus on pins GPIO2 (SDA) and GPIO3 (SCL). Therefore, the I2C stack, which is already integrated in the Raspberry OS, can be used for control. Let's take a look at how to do this in the Python programming language.

Read more: Using PI-AIO and PI-DIO with Python in Raspberry OS

HAT modules not only for PI-CPUF407

Three modules have been developed with digital and analogue interfaces not only for the PI-CPUF407. This includes the PI-FIO module, designed for direct use of the interfaces on the STM32F407 processor, as well as PI-DIO with galvanically isolated digital inputs and outputs and PI-AIO with galvanically isolated analog inputs and outputs. PI-DIO and PI-AIO are compatible with the HAT+ standard for Raspberry Pi.

Read more: HAT modules not only for PI-CPUF407

CPU module PI-CPUF407

We took the core of the IPC-CPUF407 modular computer and placed it on a board with Rasberry PI format. The result is probably the most sophisticated module with an STM32F407 processor that includes Fast Ethernet and Wi-Fi communication interfaces, a MicroSD card slot, two USB interfaces, a GPIO expansion connector with digital and analog inputs and outputs, and a serial terminal with a command line with USB-C bridge.

Read more: CPU module PI-CPUF407

Introducing the dive computer

In cooperation with the Lost divers club we started to develop a closed circuit rebreather and also a diving computer with decompression calculation. Now we can present the first prototype of LD'sC/DC computer, which is designed for both beginners and advanced divers, as it can work with multiple gases including trimix and also with open or closed circuit option. This computer will be the same for a complete rebreather with oxygen dosing control.

Read more: Introducing the dive computer

Universal Infrared Receiver (IR) for all typical remote controllers. Compatible with LIRC under Linux and Girder like under Windows OS. Implemented decoders for Philips RC5/RC6, NEC, Panasonic codes and universal for other codes. Behaves like serial port and sends commands in HEX or ASCII format.

 

 

Download User's Guide.

Download Windows Driver.

Cookies

We use cookies to deliver and enhance the quality of our services.